Building a Grape Arbor in your own backyard.

Backyard Grape Arbor

Building a Grape Arbor is something that has been on my to do list for the past 10+ years. Grapes are a wonderful crop to grow on your own land as they grow very fast, are fairly pest resistant and easy to grow. They do require regular maintenance, pruning being the chief requirement.

As a child I remember visiting my grandparents farm during the summer and eating ripe grapes from their vine. It is a memory that I cherish and look forward to eating from my very own grape vines once more.

Building a Grape Arbor is a DIY project that you can tackle yourself. It takes some hard work, several partners, effort and time, but if you are diligent you can build a Grape Arbor in a week.

Why I wanted to build a Grape Arbor?

Building a Grape Arbor has been a dream of mine for a very long time. Not only functional as a trellis for the grapes to grow on, Grape Arbors add a majestic presence to your backyard or garden. They command attention as you enter their sacred space. To make the most of your time and effort , you can attach a porch swing or hammock swings. Installing solar light to Arbor creates a romantic and relaxing seating area in your backyard.

Building a Grape Arbor.

We chose a traditional style Pergola for our Backyard Grape Arbor. I wanted something that would not only serve as a trellis for grape vines, but a place that I could hang some backyard Hammock Swings. Above is the final completed project of the Arbor in our backyard. It is 8 feet tall is roughly 12 feet long.

Shopping list for a backyard Grape Arbor.

Posts: (4) 4×4 @ 7’6.5” and (8) 2×6 @ 8”.

Beams: (2) 4×6 @ 12’

Braces: 2×4’s

Runner on to of Arbor: (11) 2×4’s @ 5’8”. For a decorative look, cut the ends of the 2×4’s at a 45 degree angle or bevel. This is optional.

1 box of 2” deck screws and 1 box of 4” deck screws.

After we unloaded the wood, we cut the 2×4’s and 4×6 beams to size and beveled the ends at a 45 degree angle.

Before building the Arbor, we prepared the ground by digging the footings. We dug 4 holes at the dept of 4 feet. To accomplish this we rented an Agar to dig the depth of the holes.

After the footings were dug, we connected two 2×6’s to each of the 4×4’s then cemented them in place.

Next, we lifted the large 4×6 beams on center over the pair of 4×4 posts. These beams sit on top of the 4×4 posts. You can screw them into place if you wish, we decided to let gravity do the work for us.

Next, we attached the 4×4 pairs to each other using a 2×6 cut to length. We then toenailed them with 4” deck screws connecting them to the 4×4 posts.

Next, we attached the (11) 2×4’s to the top of the Arbor to form the canopy. Each 2×4 is held into place and connected to the 4×6’s using braces.

Nearing the end of our construction project, we cut the remaining 2×4’s to form diamond supports connecting the 4×4 beams to one another. These braces add beauty and strength to the Pergola. They are attached to the main support beams with pocket hole screws.

Finally, we added lattice boards to each side of the Arbor. This adds a touch of sophistication to the Arbor while giving the grape plants something to grasp onto as they climb to the canopy.

From start to finish, it took us 1 week to build this Pergola Grape Arbor. The finished product is stunning!! It brings a sense of completion to our backyard, complimenting the “coop-hood” (a.k.a. chicken coops) with an aura of dignity.

My favorite activity is to lay on my hammock under the Grape Arbor, read, listen to the chatter of my girls and watch the grapes grow.

I cannot wait for the grapes to grow and reach the Arbor canapy. Until then I will sit under my Arbor, read, sip on some wine and look forward to the day that I can eat fresh grapes from my very own grape vines.

I hope you enjoyed this post. Building this backyard Grape Arbor was a worth while endeavor, bringing a completion to our backyard homestead.

You too can build a Pergola Grape Arbor in your own backyard or garden and reap the benefits of growing your own grape vines.

Me, relaxing in a hammock swing below the Grape Arbor.
The girls working hard to keep the grape vines free of bugs and weeds.
My “hen-helping” crew, keeping the grape vines healthy, bug, and weed free.

Today May 2022

Three years after construction, the grape vines are prolific and rapidly climbing to the canopy. This years harvest (2022) will be the best yet! 🍇

Grape Vines loaded with tiny grapes.

In addition to The Kuntry Klucker, I also maintain a sister blog “Knowledge of the Spheres” . Chiefly dedicated to my other passion Astronomy, Astrophysics, and anything space. If this subject matter interests you, drop by.

Till next time, keep on crowing!

~ The Kuntry Klucker Crew ~

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s